If your Austin home still has older wiring, you may be wondering what whole-house rewiring costs. The typical national installed-cost range is $6,000 to $20,000 per job, but your actual quote depends on home size, wall access, and whether the electrical panel needs replacement. This guide breaks down those cost drivers, what permits are usually required, and how to compare electricians in Austin, TX. HomeImproverz currently lists seven electricians serving the Austin area, so you can start gathering itemized estimates with a clearer idea of what the work involves.
Whole-house rewiring is priced per job, and the typical national installed-cost range is $6,000 to $20,000. That range covers replacing the wiring throughout a home, but it is not a fixed price. In Austin, TX, and elsewhere, an electrician will look at home size, wall access, and whether the electrical panel needs replacement. A larger home with finished walls often costs more because the work is more involved.
If the panel is part of the project, expect that as a separate line item; an electrical panel upgrade typically runs $1,500 to $4,500. Other electrical projects can be scheduled at the same time, such as EV charger installation at $800 to $2,500, or whole-house generator installation at $7,000 to $20,000. When you search for cost wiring & rewiring Austin TX, you will see a range of quotes; the drivers above explain why. Remember these are typical ranges, not quotes, and the price wiring & rewiring Austin TX homeowners receive will vary by contractor, access, and the exact scope of work. Always compare written, itemized estimates rather than a single lump sum.

| Project | Typical range | Main cost drivers |
|---|---|---|
| Whole-house rewiring | $6,000–$20,000 per job | home size, wall access, panel replacement |
| Electrical panel upgrade | $1,500–$4,500 per job | amperage (100A to 200A), utility service changes, permit and inspection |
| EV charger installation (Level 2) | $800–$2,500 per job | distance from the panel, panel capacity, charger hardware |
| Whole-house generator installation | $7,000–$20,000 per job | generator size, transfer switch, gas line and concrete pad |
Typical installed-cost ranges, labor and materials included. Your price depends on your home and the contractor – get two or three written estimates. Ranges are periodically reviewed.
Permits are usually required for rewiring, panel upgrades, new circuits, EV charger circuits, and generator installation. They are usually not required for replacing a light fixture or outlet on an existing circuit. Permit rules are set by your city or county building department, and many require the licensed contractor to pull the permit and schedule inspections. Ask your electrician who is handling the permit before work begins.
Permit rules are set by your city or county building department, and many require the licensed contractor to pull the permit and schedule inspections.
The typical national installed-cost range for whole-house rewiring is $6,000 to $20,000 per job. Austin quotes can land anywhere in that range depending on home size, wall access, and whether the electrical panel needs replacement. That figure is not a fixed local price; it is a starting point for comparing written estimates. Ask each electrician to break out labor, materials, permit fees, and any panel work so you can see what drives the difference.
The main cost drivers are home size, wall access, and panel replacement. A larger home has more wire runs and more outlets, switches, and fixtures to connect. Finished walls and hard-to-reach areas can add labor time. If the electrical panel is replaced as part of the job, that adds a separate line item; an electrical panel upgrade typically costs $1,500 to $4,500. Permit and inspection requirements also affect the total.
In most places, yes. Rewiring, panel upgrades, new circuits, EV charger circuits, and generator installation usually require a permit. Replacing a light fixture or outlet on an existing circuit usually does not. Permit rules are set by your city or county building department, and many require the licensed contractor to pull the permit and schedule inspections. Confirm the permit responsibility with your electrician before work starts.
You can plan related electrical work at the same time, but each project has its own cost. EV charger installation typically ranges from $800 to $2,500 per job, depending on distance from the panel, panel capacity, and charger hardware. Whole-house generator installation typically ranges from $7,000 to $20,000, depending on generator size, transfer switch, gas line, and concrete pad. Ask your electrician whether combined work changes the permit or inspection scope.
Start by asking for itemized written estimates that separate labor, materials, permit fees, and any panel or circuit work. Confirm the electrician is licensed where required and ask who pulls the permit. HomeImproverz lists seven electricians serving Austin, TX, so you can request multiple quotes. The goal is to compare scope, exclusions, and timeline, not just the bottom-line number. A clear estimate usually makes it easier to spot missing items before work begins.
Browse local pros by city, compare ratings and hours, and request written estimates.
Last updated October 12, 2026
You must be logged in to post a comment.