If your furnace is failing, the first question is usually how much replacement will cost. In Austin, TX, furnace replacement typically runs $3,000 to $7,500 per job installed, though the exact price depends on your home and the contractor you hire. The range covers the equipment and installation, and it can move based on whether you need a gas or electric unit, the efficiency rating you choose, and whether venting changes are required. This guide breaks down the numbers, permit rules, and the questions to ask before you hire an HVAC contractor in Austin.
The figures on this page are typical national installed-cost ranges, not a quote for your specific Austin home. For furnace replacement, expect a typical range of $3,000 to $7,500 per job. That range can move based on whether the unit is gas or electric, the efficiency rating you select, and whether venting changes are needed. If your project expands beyond the furnace, related HVAC work is priced separately: central AC replacement typically runs $5,000 to $12,500, heat pump installation $5,000 to $15,000, and ductwork replacement $2,000 to $7,000. AC repair is a smaller line item at $150 to $1,500. A full HVAC replacement usually combines a furnace with AC or heat pump work, so ask for each item to be listed separately rather than relying on one bundled number. Get written quotes from more than one HVAC contractor so you can compare the same scope.

| Project | Typical range | Main cost drivers |
|---|---|---|
| Furnace replacement | $3,000–$7,500 per job | gas vs electric, efficiency rating, venting changes |
| Central AC replacement | $5,000–$12,500 per job | tonnage and SEER2 rating, ductwork condition, refrigerant line changes |
| AC repair | $150–$1,500 per job | part (capacitor, fan motor, compressor), refrigerant, after-hours calls |
| Heat pump installation | $5,000–$15,000 per job | ducted vs ductless, capacity, cold-climate models |
| Ductwork replacement | $2,000–$7,000 per job | home size, attic access, insulation level of ducts |
Typical installed-cost ranges, labor and materials included. Your price depends on your home and the contractor – get two or three written estimates. Ranges are periodically reviewed.
For furnace and HVAC work, permits are usually required for AC or furnace replacement, heat pump installation, new ductwork, and gas furnace connections. They are usually not required for filter changes, routine maintenance, or thermostat replacement. Permit rules are set by your city or county building department, and many require the licensed contractor to pull the permit and schedule inspections. Before work starts in Austin, ask your contractor who is handling the permit and which inspections are included.
Permit rules are set by your city or county building department, and many require the licensed contractor to pull the permit and schedule inspections.
In Austin, TX, furnace replacement typically falls in the $3,000 to $7,500 range per job installed. That is a typical national installed-cost range, not a fixed quote. Your actual price depends on your home, the contractor, whether you choose gas or electric, the efficiency rating, and whether venting changes are needed.
A typical residential furnace replacement runs $3,000 to $7,500 per job, based on the national installed-cost range shown on this page. Treat that as a planning range rather than an average for every home. Contractors price the same job differently, and factors such as gas versus electric, efficiency rating, and venting changes can move the number.
A separate gas furnace price is not listed here. The furnace replacement range of $3,000 to $7,500 covers furnace work generally, and gas versus electric is a cost driver. Because gas connections and venting changes can affect the scope, ask an HVAC contractor for a written quote for your home.
Full HVAC replacement usually means replacing the furnace plus central AC or a heat pump. Those items are priced separately: furnace replacement is typically $3,000 to $7,500, central AC replacement $5,000 to $12,500, and heat pump installation $5,000 to $15,000. If ductwork is also replaced, that range is $2,000 to $7,000. Ask for each line item in writing rather than a single bundled figure.
Permits are usually required for AC or furnace replacement, heat pump installation, new ductwork, and gas furnace connections. They are usually not required for filter changes, routine maintenance, or thermostat replacement. Permit rules are set by your city or county building department, and many require the licensed contractor to pull the permit and schedule inspections. Confirm the permit scope with your contractor before work begins.
If you only need heating work, the furnace replacement range is $3,000 to $7,500 per job. AC repair is a separate line item at $150 to $1,500, central AC replacement is $5,000 to $12,500, heat pump installation is $5,000 to $15,000, and ductwork replacement is $2,000 to $7,000. Only the furnace line applies if the rest of the system is in good shape.
Browse local pros by city, compare ratings and hours, and request written estimates.
Last updated November 16, 2026
You must be logged in to post a comment.