Austin summers are long and hot, so your air conditioning is not a luxury — it is what keeps a house livable from May through September. When a system fails, homeowners want a licensed HVAC contractor who can diagnose the problem quickly and give a straight answer about repair versus replacement.
This page covers how HVAC work is priced in Austin, which jobs typically need a permit, what local conditions do to equipment, and how to compare contractors before you sign anything.
Ranked by Google rating weighted by number of reviews, with a small boost for complete, owner-verified profiles. HomeImproverz does not accept payment for rankings.
Champion Cooling, Heating & Plumbing provides water heater service, plumbing repairs, and HVAC repair, maintenance, and replacement for homeowners in Austin, Texas. The company is open 24 hours a day.
McCullough Heating, Air Conditioning & Plumbing offers water heater services, general plumbing, heating, air conditioning, and home energy audits in Austin, TX. They also provide maintenance plans and are open 24/7.
Abacus Plumbing, Air Conditioning, & Electrical provides water heater installation and repair, drain and sewer service, plumbing repairs, HVAC maintenance and installation, and electrical work for Austin, Texas homeowners, with 24-hour availability every day.
Abacus Plumbing, Air Conditioning & Electrical provides water heater repair and installation, drain cleaning, leak detection and 24/7 emergency plumbing in Austin, Texas, along with air conditioning and electrical services.
Goettl Air Conditioning and Plumbing – Austin TX provides water heater service, plumbing repairs, drain clearing, and heating, cooling, and indoor air quality work for Austin homeowners.
Elite Air Conditioning and Plumbing provides 24-hour HVAC and plumbing service in Austin, including water heater repair, drain cleaning, AC repair, and system installation for homes and businesses.
Radiant Plumbing, Air Conditioning, & Electrical provides plumbing and water heater services, plus HVAC and electrical work, for homeowners in Austin, Texas.
Stan's Heating, Air, Plumbing & Electrical provides water heater services plus HVAC and electrical work for homeowners in Austin, Texas.
SALT Plumbing Air & Electric is a plumbing and HVAC company in Austin, Texas, offering water heater services along with general plumbing and air conditioning repair for local homeowners.
Turbo Plumbing provides water heater services, general plumbing, air conditioning and HVAC repair, and electrical work for homeowners in Austin, Texas. One company for several household systems.
Air Conditioning & Heating Austin is an HVAC contractor in Austin, Texas, offering air conditioning maintenance and installation, heating replacement, heat pump service, insulation, and HVAC repair for homes and businesses.
Austin homeowners call HVAC contractors for a wide range of work: AC repair and installation, furnace and heating, heat pumps, ductwork and duct cleaning, indoor air quality, and emergency HVAC. Because cooling season runs so long here, most calls are about air conditioning — a system that is short-cycling, blowing warm air, leaking refrigerant, or simply at the end of its life. Heating calls pick up in the cooler months, and heat pump interest has grown as homeowners look for one system that handles both.
Our Austin directory currently lists 11 HVAC contractors, with an average rating of 4.8 across rated listings; six are listed as open 24 hours and six show a license on file. The highest-rated listings include Air Conditioning & Heating Austin at 5.0, Elite Air Conditioning and Plumbing at 4.9, and SALT Plumbing Air & Electric at 4.9.
Whether you need a local HVAC contractor for routine maintenance or a licensed HVAC contractor for a full system replacement, many Austin companies also handle plumbing, electrical, or water heater work, which can be convenient when several systems need attention at once. Whatever the job, ask for a written scope, a clear price, and confirmation of who pulls the permit.
HVAC pricing in Austin depends on the job, the equipment, and your home. These typical installed-cost ranges come from national data and are meant as a starting point for comparing quotes — every contractor prices differently.
AC repair runs about $150 to $1,500 per job. Central AC replacement runs about $5,000 to $12,500. Furnace replacement runs about $3,000 to $7,500. Heat pump installation runs about $5,000 to $15,000. Ductwork replacement runs about $2,000 to $7,000.
Common cost drivers include tonnage and SEER2 rating, ductwork condition, refrigerant line changes, whether the system is gas or electric, efficiency rating, venting changes, ducted versus ductless design, capacity, cold-climate models, home size, attic access, and the insulation level of existing ducts. Repair quotes also vary by part — a capacitor, fan motor, or compressor — refrigerant, and after-hours calls. Get at least two or three written quotes.

| Project | Typical range | Main cost drivers |
|---|---|---|
| Central AC replacement | $5,000–$12,500 per job | tonnage and SEER2 rating, ductwork condition, refrigerant line changes |
| AC repair | $150–$1,500 per job | part (capacitor, fan motor, compressor), refrigerant, after-hours calls |
| Furnace replacement | $3,000–$7,500 per job | gas vs electric, efficiency rating, venting changes |
| Heat pump installation | $5,000–$15,000 per job | ducted vs ductless, capacity, cold-climate models |
| Ductwork replacement | $2,000–$7,000 per job | home size, attic access, insulation level of ducts |
Typical installed-cost ranges, labor and materials included. Your price depends on your home and the contractor – get two or three written estimates. Ranges are periodically reviewed.
Austin's long, very hot summers are hard on cooling equipment. Systems run for long stretches, so correct sizing, a proper refrigerant charge, and regular maintenance matter more here than in milder climates. A unit that was sized for a different climate may struggle to keep up in July and August, and a system that is even slightly undercharged will run longer and cost more to operate.
Hail is the other local factor. Austin-area hail storms can bend the fins on an outdoor condenser, which reduces efficiency and can lead to bigger problems over time. If a storm has passed through, it is reasonable to ask a contractor to inspect the outdoor unit and the pad it sits on.
Routine tune-ups before summer are the simplest way to avoid a mid-August breakdown.
A permit is usually required in Austin for AC or furnace replacement, heat pump installation, new ductwork, and gas furnace connections. Simple work such as filter changes, routine maintenance, and thermostat replacement usually does not need one.
Permit rules are set by your city or county building department, and many require the licensed contractor to pull the permit and schedule inspections. Confirm the current requirements with the City of Austin before work starts, and make sure the permit is closed out when the job is done.
Permit rules are set by your city or county building department, and many require the licensed contractor to pull the permit and schedule inspections.
In our Austin directory, the highest-rated listings by Google rating are Air Conditioning & Heating Austin at 5.0, Elite Air Conditioning and Plumbing at 4.9, and SALT Plumbing Air & Electric at 4.9. Champion Cooling, Heating & Plumbing and Goettl Air Conditioning and Plumbing also appear at 4.8. Ratings are only a starting point — confirm licensing, insurance, and a written quote before you hire.
Typical ranges from national installed-cost data: AC repair about $150 to $1,500 per job, central AC replacement about $5,000 to $12,500, furnace replacement about $3,000 to $7,500, heat pump installation about $5,000 to $15,000, and ductwork replacement about $2,000 to $7,000. Actual prices vary with equipment, home layout, and the contractor you choose, so get two or three written quotes.
Permits are usually required for AC or furnace replacement, heat pump installation, new ductwork, and gas furnace connections. Filter changes, routine maintenance, and thermostat replacement usually do not require one. Permit rules are set by the city or county building department, and many require the licensed contractor to pull the permit and schedule inspections. Confirm current requirements with the City of Austin before work starts.
Verify the license, ask for proof of insurance, and get a written scope and price before work begins. Confirm who pulls the permit and who schedules the inspection. Ask whether the quote covers refrigerant, parts, and labor, and whether after-hours visits cost extra. Request references from Austin homes with similar systems, and get warranty terms on parts and labor in writing.
Long, very hot summers mean AC systems run for long stretches, so sizing, refrigerant charge, and regular maintenance matter more here than in milder climates. Undersized or undercharged systems tend to struggle in July and August. Hail storms are the other common issue — they can bend the fins on an outdoor condenser, which reduces efficiency.
Many Austin HVAC companies also handle plumbing and water heater work, and our directory lists plumbing and electrical as related categories, with 10 plumbing businesses and 5 electrical businesses. That overlap helps when several systems need attention at once, for example a water heater replacement alongside AC work, but confirm the technician doing the work is qualified for that trade.
Six of the 11 HVAC contractors in our Austin directory are listed as open 24 hours, which matters when an AC fails during a heat wave. Emergency and after-hours calls often cost more than scheduled visits, so ask about rates before you agree to the work. Even in an emergency, confirm the license and get the price in writing.
Compare the hvac contractors above: check ratings, hours and services, then contact two or three for written estimates.
Last updated October 12, 2026
Congratulation!